Best Bench Vise

Best bench vise

How to pick the best bench vise?

One of the most important and valuable pieces of working equipment that you may find in pretty much any workshop is the bench vise and its many different alterations and field-specific variations. This tool is so widely used, that it wouldn’t be a wonder if it ended up being featured on a flag of a communist country.

Due to its rather wide spectrum of different utilizations, it can sometimes be tricky to decide just what sort of bench vise would do the job for you in the best way.

What is a bench vise and how do you operate it?

First of all, a vise is by definition a mechanical tool or apparatus, commonly found in sheds and workshops, which is used to position a certain object securely and allow various work to be performed on it with the significantly reduced movement of the object itself.

The mechanical principle on which it works is simple enough, as it has two parallel jaws facing each other, one of them being fixed and attached to the rest of the apparatus, and the other being movable.

The second, movable jaw can be threaded and inched in an out so as to accommodate the object on which some work is to be performed. If you wish to tighten up the object and thread in the movable jaw, typically the lever should be turned clockwise.

And if you want to release the previously secured object, you should turn the lever anti-clockwise.

It’s important to mention too, that you might want to be careful when threading in as the object you plan to perform work on, can be of sensitive material, so if you thread it in too much you might damage it or even break it completely, especially if your bench vise type doesn’t match the type of the object, that is, the material it is made of.

If that is the case, then it can easily happen for the vise itself to suffer damage. For example, if you have a wooden vise and try to secure a rough piece of metal, the fine wood structure of the jaws may be in peril of breaking in or receiving tiny damage marks.

Types of a bench vise 

One of the most common types of bench vises are the woodworking bench vises, which are usually fitted on the workbench in such a way as to protrude slightly from the edge to enable the easy handling of the lever.

The jaws on these bench vises are typically made of wood, but various wood -metal combinations can be found. They are usually made in such a way to reinforce and protect the sensitive wooden work which is being secured by the vise.

The second type of vise is the engineer’s vise, and the most important difference between these and the woodworking ones is their completely metal construction, and for that reason, they are sometimes called “metalworking” bench vises.

These are used to clamp and secure metal rather than wood, and their tight grip allows various high precision procedures to be performed on the object, such as cutting or filing.

Besides these two most common vise types, there are also types of vise specifically built for application in various other operations, as with plumbing, milling, and some minor lightweight work assignments.

Best Bench Vise on the market

1. Wilton 11104 Wilton Bench Vise

Wilton 11104 Wilton Bench Vise


Are you looking for a bench vise that can be used for a variety of applications and that is durable? This is one of the best products that you can choose. It is made of high strength steel, it is durable and reliable, and it comes with a double lock down swivel base and a large work surface. It can be installed on must sturdy surfaces and it comes at a great price. This bench vise has a 4-inch jaw width and a 4-inch jaw opening.

This product has lifetime warranty, so you can rest assured that no matter what happens, you are covered. It weighs 9.6 ounces, it can be easily removed from the surface that you install it on and it measures 12 x 5.9 x 6.4 inches. Are you a handyman, a craftsman or you simply want to have a bench vise in your garage in case you need it? This product is tough enough to resist a lifetime.


  • It is inexpensive
  • It is well-designed
  • It is durable
  • It is made of steel
  • It is easy to install
  • It can be held in place with pins
  • It has lifetime warranty
  • It is great for small and large projects
  • It has a 4-inch jaw opening
  • It has a 4-inch jaw width


  • It has a few design flaws

2. TEKTON Swivel Bench Vise

TEKTON Swivel Bench Vise


This TEKTON bench vise is a durable product that you can use for small and large projects if you are a handy man or you enjoy working on DYI projects. It is made of cast iron, having a 30,000 PSI tensile strength; it comes with a replaceable serrated steel jaw and a non-slip grip. Its 120-degree swivel base has dual lock-down nuts and 3 mounting holes that help you secure it properly. Also, it has a polished steel anvil that gives you the possibility to work smoothly and consistently when shaping metal pieces.

This is a large sized product comparing to the previous one in our list. It measures 19.8 x 10.1 x 9.2 inches and it weighs 77 pounds. It has an 8-inch jaw opening. It is easy to install and use. It does not come with mounting bolts or any hardware, which is why you have to buy them yourself. However, it is covered by a lifetime warranty from its manufacturer. If you need a bench vise that will last a lifetime, you should invest in this product.


  • It is made of cast iron
  • It is nicely designed
  • It is easy to install
  • It has a 7-3/8 inches jaw opening
  • It has a tensile strength of 30,000 PSI
  • It has a 3-7/8 inch throat depth
  • It has an anvil size of 5-1/2 x 6 inches
  • It has a 120-degree swivel base
  • It is durable
  • It is suitable for large projects
  • It is covered by lifetime warranty


  • It is more expensive than most similar products

3. Yost 750-E Rotating Bench Vise

Yost 750-E Rotating Bench Vise


This is a rotating bench vise that has a 5-inch jaw width and that is highly durable, being made of cast iron. This product is designed to help amateur craftsman build up their projects with the help of a high-quality tool. It has 4 mounting holes, a lockdown that helps keep the head of the vise in place, a rotating head ad a large built-in anvil. This product is great for flat shaping. It has a 5-inch jaw width, a 5-inch jaw opening and a 3-inch pipe jaw capacity.

It weighs 35 pounds and measures 9 x 18 x 7 inches. It is one of the best bench vises for DIYers, as it is easy to install, use and remove from a workbench. It is highly durable thanks to the strong metal that it is made of and it is expected to last a lifetime. Its 360 degree swivel base is one of its greatest advantages. Also, it features 3 sets of jaws: machinist jaw, pipe jaw and V-jaw. This versatile product is what you are looking for if you are pretentious when it comes to your tools.


  • It is durable
  • It is well-designed
  • It has a 5-inch jaw capacity
  • It has a 5-inch jaw opening
  • It is medium-sized
  • It is made of cast iron
  • It has a 360-degree swivel base
  • It comes with 4 mounting holes
  • It is easy to mount
  • It comes with 3 different sets of jaws
  • It is rotating
  • It has a large work surface at the back of the vise


  • It is quite expensive comparing to other similar bench vises

4. Grizzly G7062 Bench Vise

Grizzly G7062 Bench Vise


Are you looking for a multi-purpose bench vise that is medium-sized and can help you get your DIY and home projects done in no time? This Grizzly bench vise is exactly what you need. Its price is reasonable comparing to the market’s offer, it has a 360 degree rotating jaw, it can be used for an endless list of activities and it is versatile. Also, its base swivels easily. This product weighs 50 pounds and measures 9 x 18 x 9 inches.

It comes with 2 screws in the back that can be used to tighten it at the desired angle. Also, they can be left loose, in which case the jaws will rotate freely. This is a durable product that comes in red and silver, has a reasonably sized work surface and a great design. It can be used for various purposes and positioned in any angle in order to work with small or large pieces of material.


  • It is reasonably priced
  • It has a medium size
  • It is great for home workshops
  • It has a nice design
  • It is multi-purpose
  • It has a 360-degree rotating jaw
  • It is versatile
  • It has a swivel base
  • It comes with a 3-inch anvil face


  • It is durable, but made of soft steel

5. Irwin Tools Clamp-on Vise

Irwin Tools Clamp-on Vise


If you are looking to buy a vise that does not need to be mounted and that is inexpensive, you should take a look at this product. It is a clamp-on vise with a 3-inch jaw opening. It is suitable for beginners or small projects, but unlike other larger products, it is portable. It has an easy clamp-on feature that makes it easy for users to work anywhere and can be attached to working surfaces of up to 2 inches thick.

This product comes with an integrated shaping horn and an integrated pipe jaw that keeps the workpiece in place. It has a 2 inch jaw capacity that makes it suitable for all general tasks. It is made of metal and plastic, which doesn’t make it as durable as other products, but it is a good product for easy tasks. It weighs no more than 4 pounds and measures 6.2 x 3.4 x 6.9 inches. This clamp-on vise is easy to use, versatile and easy to transport.


  • It is cheap
  • It is easy to use
  • It is a clamp-on product
  • Does not require mounting
  • It has an integrated shaping horn and anvil
  • It has a 2-inch jaw capacity
  • It has a 3-inch jaw opening
  • It is lightweight
  • It is portable
  • It is small sized
  • It is suitable for small projects and beginners


  • It is not that durable, as it is made of metal and plastic
  • It has design flaws
  • It is not suitable for experienced users or large projects
To Top